Configure
The Majek boards are designed by legendary shaper Glenn Pang from Hawaii and made at the Appletree factory in the Appletree construction.
Choose your desired size below. Production time is 10-12 weeks.
Majek Burner
Appletree x Glenn Pang
Appletree Surfboards is proud to present our shaper collaboration with Majek foilboards from Oahu Hawaii. Majek boards are designed by legendary northshore shaper Glenn Pang, who has been shaping high end surfboards for the world’s best surfers for years. He has now turned (part) of his attention to foiling and this hasn’t gone unnoticed.
You can see his boards under the feet of many great foilers and surfers. His shapes are now available in our proven appletree full carbon construction, taking them to yet another level. And they are now easy to order from wherever you are located, because we ship boards all over the world.
Majek Burner midlength prone
The Majek burner is Glenns midlength prone foil shape. Unrivalled paddle and wave catching ability. For prone paddle, wing and to use with an electric foil assist, like the Foildrive.
Here is what Glenn Pang, the shaper of all the Majek boards, has to say about the model:
The burner is tried and tested in the fast high period waves on the Hawaiian islands. With faster waves, you need a faster board, so I designed this to move through the water with the greatest ease.
A deep recess deck “hugs” your chest and provides a lot of volume up front which gives even more paddle power.
The foil boxes on the Burner are placed forward, so when on foil the length balances out and you hardly notice the added length.
Take note of the scaling, the longer board is narrower than the shorter model. The longer size has more volume, but to further increase the speed performance, the width is reduced.
Majek boards come in clear carbon and without inserts/deck pad as standard. They are made to order.
FOIL CONSTRUCTION
50K CLOSED CELL FOAM
It all starts with the core and every board we make starts with a foam core of our very own 50K closed cell foam. This foam is formalized exclusively for us, it is not used in any other board in the market.
The foam can withstand 50.000 kg per square meter, while staying very light, and most of all very flexible. Another plus of our 50K foam is that it is closed cell, meaning that the foam will not take in water, and the board will not blow out when it gets hot.
100% CARBON FIBER CONSTRUCTION
All our foil boards are produced in our 100% carbon fiber construction. You want carbon fiber in a foil board for its stiffness and strength. A stiff board will give you the best control and response from the foil. Also stiffness will make pumping the foil much more effective. With carbon fiber we are able to make the board extremely strong while really light at the same time.
The most stress in a foil board is in the connection of the foil to the board. So this is where we put extra care and attention to make it the strongest connection available. The foil mount is CNC cut with the board, for the highest precision. We only use FUTURES oneshot boxes as they are the strongest in the industry. The boxes are placed in a panel of ultra high density PET honeycomb. This PET honeycomb itself is sandwiched in carbon again. Meaning there is carbon fiber both inside the board and outside. The honeycombs open structure ensures a solid connection between inside and outside, fusing everything together into a solid block.
Our lamination is completely different as well. We use a vacuum technique developed in house, where we layer all the carbon fiber, and reinforcements on the board dry. Then we extract all the air from the bag and inject the epoxy resin under pressure. This results in the tightest lamination possible, with the best ration between fiber and epoxy. It also gives 100% connection to the core so the boards do not delaminate. Extra patches under the feet prevent heel denting.
Inserts in our foil range are made from blocks of high density material. And can be customized position wise. These blocks are also fused to the core so they never pull out.
| Burner | Width | Volume |
| 5’0” | 17.50” | 45L |
| 5’5” | 16.50” | 50L |
Reviews
There are no reviews yet.