950,00 1.300,00

Configure

Check current stock below or order a custom board.

Target production time for custom boards is 4 weeks.

After confirmation of order we will inform you about the actual production time.

If you would like more customisation, feel free to contact us!

Clear

Luke’s Leaf

Luke McGillewie no-nonsense freestyle killer

 

Luke designed this model to suit most of his riding freestyle and in waves. Around his home in Cape Town and during his travels around the world. It is a no-nonsense design, just a perfectly tuned combination of outline, rocker and bottom contour. The board feels very reliable under feet and the almost identical outline of the tail and nose makes lading reverse very easy. Speaking off the nose, this is thinned out and hides quite a bit of bottom rocker to prevent the board from diving. Overall the board is small, and therefore lighter than most other boards of similar volume, perfect for those big airs.

 

Board details

There is quite a bit of hidden volume in the LUKE, so you can ride it very short. Luke’s personally rides the board in just 4’11” The idea is to make the board light so it travels with you through the air. The boards profile also makes it very strong. A thicker middle section and the lack of channels or grab rails give the board more strength. You will have to do your absolute best to break a board like this especially combined with Appletree’s exclusive hex-skin construction.

Luke’s Leaf will need a bit of power to get going, the small template give less upward pressure than other boards. So as a beginner rider in strapless freestyle, other models might be more suitable. Advanced riders will love the response and pop the Luke’s Leaf provides. Sticking new tricks from day one!

Both the Hex-skin Glass as well as the Hex-skin Carbon versions are extremely strong. The Carbon version is quite a bit lighter and carbon naturally has a quicker response and better pop of the waters surface. The Glass version is heavier, still very strong and with a softer more comfortable flex to dampen chop. Whichever construction you go, the Luke’s Leaf will get propel you to new hights! This board comes in the Hex-skin Extra strength construction as standard, an even stronger version can also be ordered, but that is only recommended for very heavy footed riders.

 

 

 

 

Board Characteristics

Rails

full

mid

pinched

Rocker

low

moderate

high

Width

narrow

balanced

full

Wave Performance

Wave Height

ankle

head high

double overhead

Wave Power

sloppy

steep

barrel

Shape

Skill level

beginner

intermediate

pro

Upwind

0%

50%

100%

Low wind

0%

50%

100%

High wind

0%

50%

100%

Strapless freestyle

0%

50%

100%

Hex-Skin construction

Hex-skin Glass

Our standard hex-skin construction, consists of the 50K foam core, the core is wrapped in a first layer of structural fibreglass, in a 45 degree orientation. This to keep the board as flexible as possible while making a very strong base. The deck is now layered with a honeycomb layer for more impact resistance. The bottom is left without honeycomb, again to maintain maximum flex.

All normal Klokhouse and Appleflap boards come with a single honeycomb layer. Optionally the glass boards can be ordered with an additional layer of honeycomb, specially for heavy footed riders. Normal use is fine without this layer, but sometimes you want this added durability. This is why ALL BOARDS UPTO 5’5” come WITH the additional layer of honeycomb. Because the smaller boards are used much more for strapless freestyle. 

We also use this extra layer to mount optional inserts, because riding with inserts adds a lot of stress to a very small and specific area of the board.

The board is  fully wrapped in another layer of fibreglass in the 0 and 90 degree orientation. The whole board, including fin boxes, leash plug and graphics is now pulled in a tight vacuum to compress all the layers together and to pressed onto the core for maximum connection. The board is then encased in the most sustainable epoxy resin available, this resin is tinted to give the boards their unique appearance. There are many colors available and even more on request! You can fully customise your boards appearance so it is unique and there is no one like it anywhere. After the boards are cured, they are hand finished and checked one by one to make sure the meet our exact standards, and you get the board of your dreams!

Hex-skin Carbon

Hex-skin Carbon is similar in composition to the hex-skin Glass boards. But instead of glass we use 100% carbon fibre, there is no glass hidden underneath the top layer of carbon. Using carbon makes the board lighter and it makes it stick to your feet even better. Because the board is so light, it flows over the chops a lot better than you might expect.

To give the carbon boards their unique look the deck is finished with a tinted resin, that can be customised, pick your own color or mix multiple for a truly one of a kind board.

 

LL    Width Thickness Volume Surfer weight *
4’9” 17,1″ 2,0” 19 L < 70 KG
4’11” 17.66” 2,10” 21 L <70-85 KG
5’1” 18” 2,2” 23 L 85> KG