Target production time for custom boards is 5 to 6 weeks.
After confirmation of order we will inform you about the actual production time.
If you would like more customization, feel free to contact us!
Surf foil board
Join the foil craze!
New to surf foiling? This board is the perfect beginner surf foil board. Whether you surf or kitesurf, we’re pretty sure you’re gonna love foil surfing. No chop, no bumps, just an effortless silent flight. And the best thing is, you hardly need a wave for it. The large volume of this surf foil board will get you up quick on the smallest waves. The deck is slightly concaved to get you in position when paddling into the wave. This beginner surf foil board is super light and stiff. In the standard configuration the board is only 2.5KG’s!
Two Futures US boxes connect the foil to your carbon paddle foil board. The boxes are positioned in the most common configuration at 90mm to accept most foils in the market. This connection system is the strongest and lightest available
For the ultimate kite foil experience we recommend the Mini foil. But in the smaller sizes, the surf foil board is really fun to kite as well!
50K CLOSED CELL FOAM
It all starts with the core and every board we make starts with a foam core of our very own 50K closed cell foam. This foam is formalized exclusively for us, it is not used in any other board in the market.
The foam can withstand 50.000 kg per square meter, while staying very light, and most of all very flexible. Another plus of our 50K foam is that it is closed cell, meaning that the foam will not take in water, and the board will not blow out when it gets hot.
100% CARBON FIBER CONSTRUCTION
All our foil boards are produced in our 100% carbon fiber construction. You want carbon fiber in a foil board for its stiffness and strength. A stiff board will give you the best control and response from the foil. Also stiffness will make pumping the foil much more effective. With carbon fiber we are able to make the board extremely strong while really light at the same time.
The most stress in a foil board is in the connection of the foil to the board. So this is where we put extra care and attention to make it the strongest connection available. The foil mount is CNC cut with the board, for the highest precision. We only use FUTURES oneshot boxes as they are the strongest in the industry. The boxes are placed in a panel of ultra high density PET honeycomb. This PET honeycomb itself is sandwiched in carbon again. Meaning there is carbon fiber both inside the board and outside. The honeycombs open structure ensures a solid connection between inside and outside, fusing everything together into a solid block.
Our lamination is completely different as well. We use a vacuum technique developed in house, where we layer all the carbon fiber, and reinforcements on the board dry. Then we extract all the air from the bag and inject the epoxy resin under pressure. This results in the tightest lamination possible, with the best ration between fiber and epoxy. It also gives 100% connection to the core so the boards do not delaminate. Extra patches under the feet prevent heel denting.
Inserts in our foil range are made from blocks of high density material. And can be customized position wise. These blocks are also fused to the core so they never pull out.